Office Wall Logos

Polystyrene logos can be supplied from 12mm to 600mm thick, 25mm to 2000mm high colour matched to corporate colours. Supplied in a natural white finish, painted finish or vinyl card faced finish.

Polystyrene logos are used for Exhibition Header Panels, Shop Displays, Events and for Commercial Photographic Imaging.

Polystyrene logos can also be used for permanent signs out side when finished
with an acrylic resin coating.

large 3d logosPolystyrene logos are cut from HDFRA grade material containing a fire retarding additive. Logos are supplied in a natural white polystyrene finish or they can be painted with a vinyl matt emulsion to a colour of your choice. Polystyrene logos can be faced with a chrome or gold finish or gloss vinyl card faced with white or painted sides.
We produce the logos in sizes up to 2000mm high, 25mm thick – 300mm thick.

printed flower logosThe logos are cut from your own artwork, just send us the file by email as a vector graphic for us to cut from.

Logos are cut in polystyrene and are usually card and vinyl faced with painted sides.

Polystyrene Logos and letters are used for exhibition header panels, events, shop window displays and internal shop displays, Office Reception corporate Header Signage behind the reception desk.

Commercial photographers often use polystyrene letters in photo shoots for promotional literature and advertising brochures.

big 3d logosPolystyrene letters are also used for outside use for short term use or permanent signage purposes which can be achieved with extra layers of an acrylic resin coating.

Polystyrene Lettering and Polystyrene Logos The Various finishes, Specifications.

Expanded polystyrene (EPS) is a rigid and tough, closed-cell foam. It is usually white and made of pre-expanded polystyrene beads. Familiar uses include moulded sheets for building insulation and packing material for cushioning fragile items inside boxes. Sheets are commonly packaged as size 4 by 8 feet. A growing use of EPS in construction is insulating concrete forms. The density range is about 16�640 kg/m3. The most common processing method is thermal cutting with hot wires.
The card that goes on the face of the letters comes 800 microns thick and is usually glued onto the polystyrene using a solvent based contact adhesive. The card is usually vinyl faced with a Hexis 5000 series Branded Vinyl in either gloss or matt.

The sides of the letters are painted with an acrylic resin coating which is basically a vinyl matt emulsion, we generally use the Crown brand of paints. We put two layers of paint onto the letters for a better finish to the product.

The Finishes.

Natural white finish polystyrene logos are cut and then cleaned and are used as they come.

Card Faced polystyrene logos are cut and then a coloured vinyl card is applied to the face of the logos to give a smooth finish. Available in gloss or matt. The letters can also be supplied with painted sides in a matt finish using vinyl matt emulsion.

Painted Polystyrene logos are first cut and then given two layers of high quality vinyl matt emulsion paint. We use the Crown Brand of paints because of their quality and service and their ability to match colours to BS and RAL ranges and also to Pantone colour swatches.

Polystyrene Logos for Outside Use.

Polystyrene logos for outside use can be made to order for short term use or permanent exterior use if required for a shop sign.

If the letters are required for short term use a couple layers of water based resin and two layers of masonary paint will do the job well.

When the letters are required for permanent use outside, we use a higher density styrofoam painted to a matt or gloss finish.

The letters can be faced in MDF, acrylic, aluminium composite, foamPVC or resin faced.

Speciality Finishes.

The exterior grade styrofoam logos when treated with a resin coating can be textured in a liquefied stone finish. The letters can be glitter coated or sand coated and painted to give a textured masonry finish or to make them look like concrete letters. For 12″ high letters we use simplefix stand off fixings and for larger letters we use brass nut and bolt stand off fixings. The letters can also be glued onto the fascia with epoxy resin. Depending on the font used the letters are often reinforced with fibreglass on the back for strength.